Installing a brand-new, professional irrigation system in Dallas-Fort Worth typically requires an investment of $5,000 to $12,000, depending on the size of your property and the number of zones required. Most average-sized lots land between $7,500 and $9,000.
A fundamental 4-to-6 zone system for a standard suburban lot runs roughly $5,000 to $7,500. A premium, smart-controlled system covering a half-acre lot with complex landscaping can range from $12,000 to $25,000+.
How Irrigation Costs Are Calculated
Irrigation pricing is generally calculated by the "zone." Each zone is a specific area of the yard controlled by a single valve, optimized for the water pressure of your home.
Across DFW, expect to pay $700 to $1,500 per zone for a complete, new installation. Our systems are $975 per zone installed.
Two items sit outside that per-zone figure: a weather-based smart controller at about $675 installed, and the backflow preventer Texas requires at about $750. Permit fees are set by your city.
| Component | Cost Impact | Why It Matters |
|---|---|---|
| Trenching & Labor | High | Digging trenches through rocky Texas soil or established tree roots is labor-intensive. |
| Smart Controllers | Medium | Wi-Fi enabled controllers (like Rachio or Hunter Hydrawise) adjust watering based on live DFW weather data, saving money on water bills. |
| Drip Irrigation vs. Rotors | Low/Medium | Drip lines for foundation protection and garden beds are highly efficient and strongly recommended in North Texas. |
The Foundation Protection Factor
In areas like Frisco and Plano, the extreme shrinking and swelling of the clay soil can destroy a home's foundation. A premium irrigation design doesn't just keep the grass green; it includes dedicated drip zones around the perimeter of the house to maintain consistent soil moisture, protecting your most valuable asset.
Learn more about our water-efficient irrigation design and installation.
